The SCT
Economizer Handheld Programmer arrives
pre-loaded with tune files specifically
calibrated to Increase your vehicle's Fuel
Economy by up to 10%! The SCT Economizer
features easy to use Menu Screens, a HUGE
Back-lit display and can even Read &
Clear Diagnostic Trouble Codes.
• Instantly & Safely Add's up to 50-70HP
• Add's up to 25% More Torque
• Increases Fuel Economy up to 5%
• Quick & Easy Installation & Removal
• Power is Applied Gradually to avoid Transmission Stress
• Automatically turns off at high RPM to avoid Mechanical Damage
Visit the DCX Thrust Power Module Information Page
The
XCalibrator3 is the Premier tuning device
from SCT Performance! This multifunction
strategy flash tuner allows you to store up
to 3 separate tunes and within two minutes
flash your PCM/ECM with a new tune. Onboard
datalogging allows you to datalog certain
sessions for later viewing and when
combined with the Livelink3 software and a
laptop you can datalog any system within
the PCMs capability to control such as
spark timing, airflow, speed, rpm, etc.
along with two additional Analog inputs
such as Wideband Oxygen Sensors, EGTs,
Pressure sensors, etc.
The SCT
Livewire Flash Tuner is custom calibrated
for your specific make, model and year
vehicle. The SCT Livewire flashes your
engine for maximum horsepower, torque and
fuel mileage depending on the chosen tune.
Gain up to 33HP/35ft-lbs torque for gas;
120HP/240ft-lbs torque for diesel (varies
by vehicle). Maximum Fuel Economy Tune
delivers fuel mileage gains of up to 2 MPG,
depending on your driving style. Choose
tunes based on octane and performance
settings, or maximum fuel economy.
Big Air MAF
Meter Key Features: Recalibration no longer
required when increasing horsepower 90mm
Housing Direct Replacement for 2000+
Lightnings & 2003-2004 Cobra's OEM
Quality Calibration for more accurate
output Supports up to 825HP **BA-2800
supports up to 825 hp**
Single
program and Multi-Program Eliminator Switch
Chips available for 1987-2005 Ford cars and
Trucks. These chips plug into the J3 port
on your factory PCM/ECM computer overriding
the stock computer code and allowing you to
tune Any combination of engine
modifications!
A single
Sniper chip covers all “chip-able” Ford
applications from 1988-2004. There’s no
need to purchase more than 1 part number.
Each chip is re-programmable that allows it
to be used more than once.